The Purus microwell plate cleaner is a novel technology that aims to introduce responsible practices into the laboratory, alleviate supply-chain limitations, and lower the costs connected with single-use plastics.

The Purus eliminates biological and chemical contaminants from 96 well plates so that they could be used again.

Purus microwell plate cleaner

Image Credit: Grenova


Easy to implement in the lab

  • Users can just insert their microwell plates of all kinds in Purus by Grenova
  • The clean cycle can be chosen
  • Recover the microwell plates without any carryover
  • Reuse clean microwell plates in the laboratory
  • Users can repeat this process, over and over again, to decrease waste and save money

Source: Grenova

. .
DESCRIPTION Automated, bench tip, microwell plate cleaning system
INPUT 4 plates per cycle
  Any plate with SBS footprint
  Up to 50 mm tall (standard and deep well plates)
  96 well format or less
DIMENSIONS 28.5" D (725 MM) X 21" W (535 MM) X 28.5" H (719 MM)
  Frequency: 50-60 Hz
  Maximum power consumption: 12 Amps
  Environment temperature range: 15 degrees C - 35 degrees C
  Environment humidity: Less than or equal to 50%
  Air pressure (min): Greater than or equal to 100 PSI (0.5 MPa)
  Maximum reagents: 4
  UV Wavelength (UVC): 254 nm
  Tank size: 15 gal (38 L)
  Free air displacement at max pressure: Greater than 2.2 CFM @ 90 PSI
  Tank pressure: 120 PSI
  Output pressure: Greater than or equal to 75 PSI
  Additional considerations: In line Filter, Shut off Valve and Regulator, DI water input
THROUGHPUT Standard wash place: Estimated 12-20 plates per hour
  Rinse only: Estimated 16-24 plates per hour
VOLTAGE 110/220V availability

While we only use edited and approved content for Azthena answers, it may on occasions provide incorrect responses. Please confirm any data provided with the related suppliers or authors. We do not provide medical advice, if you search for medical information you must always consult a medical professional before acting on any information provided.

Your questions, but not your email details will be shared with OpenAI and retained for 30 days in accordance with their privacy principles.

Please do not ask questions that use sensitive or confidential information.

Read the full Terms & Conditions.